Sign up

[streloc78]

I just bought HD330 and running a humidity tests in the refrigerator.

Looks like the detected temperature is scrolling fast (less than 5 min) between 95 % and down to 35% and back up again.

I don't have any humidifiers or dehumidifiers set up.

Did I miss anything in controller set up.

PrG OFF
H-1 78%   
AH 99.9  --> so the buzz alarm will not be triggered
AL 99.9  --> so the buzz alarm will not be triggered

The rest are default.

Thank you for any input.
Steve

[Kkane]

HD330 cannot read temp. The top line is the reading humidity and bottom line is your set humidity.

You can probably check the distance between your sensor and cooling source. Also it is recommended to hang the sensor in the middle.

If you have concerns regarding the reading accuracy, please proceed a calibration test.

https://drive.google.com/file/d/0B14y9IPNqGuoQmN1RExCYldjYTQ/view?usp=sharing&resourcekey=0-gSdrCnffZo0PNYE6E5L5Yg

[streloc78]

I am sorry I meant the humidity levels.

Thank you