Sign up

[loganb]

Hi, I bought a SYL-2352P for a heat treatment oven. I saw it was rated to 240v and thought it should be fine, however looking at the wiring it shows as 110v + neutral or 2x 110v inputs i.e. two hot legs. I am in New Zealand and have 240v and neutral supply instead of two 110v supplies. Can anyone tell me if I can still use this controller and if not which one I need. Also as a side note would it be possible to run a 12v fan off the SSR output to cool enclosure while element is switched on. Thanks

[Kkane]

Yes, SYL-2352P can be used in New Zealand. You can hook up your 220V hot and neutral to this controller and it will be powered.

Most likely no. The SSR output is rated as 12V/30mA. It is good enough to drive SSR(s) but it may not be enough to drive your DC fan. You can consider using a 220V AC fan with its alarm output instead.