Sign up

[Richrez]

Hi All,

Thank you for letting me join this forum.

I am a newbie getting into powder coating and have this controller on my newly built oven and I admit the instructions are a bit overwhelming.

I just need help to set this box to two settings as I  will  not be using alarms and timers as I will be out there when items are in the oven.

I need help with two things.;

1..How do I change the box settings to farenheit from Celsius?
2. How do I set the oven to a certain degree. For powder coating it needs to be set at 400 degrees for most powders.

That is all I need to do and I can start powder coating.

I thank everyone in advance for helping this newbie.

Regards
Rich Rezes
Richrezes@gmail.com

[Kkane]

1. Display unit: To display in Fahrenheit, you need to change parameter CF to F. You need to press & hold SET key for 3s. Then keep press SET key momentarily, and you will see that parameter (last one). Change value from C to F, and press SET key again to confirm.

2. Change set temperature: You need to change parameter SP to 400. You need to press & hold Up arrow key for 3s, then you will see SP parameter. Use up/down arrow key to change bottom display for 400. Press SET key again to confirm.

Please see the tutorial video for this controller here: https://youtu.be/-_G3-fafapA

Its manual can be found here: https://www.auberins.com/images/Manual/SWA-2451A_manual.pdf