Sign up

[Dragula]

Hi,

I have got a SYL-2813 and I'm trying to use with it a "VDO" pressure sensor. It's a 0-10bar 10-184ohm.

I have set the input channel to 375r,  PuL to -0.6 and HuL to 19.2 but I think it does not work properly.

Maybe it's due to bad wiring... Could you explain me how to wire it ?

Thank you

[Kkane]

You can refer to this guide:

http://www.auberins.com/images/Manual/Quick%20Guide%20for%20resistive%20pressure%20sensor.pdf

It is based on SYL-1813, but it still works on SYL-2813. Your 10 bar pressure sender needs to connect to terminal 2 & 4, jump 1 & 2 together (for channel 1).

For settings, you need to set it as 375r, and PuL1 = -1.07 & PuH = 20.67