Sign up

[amcfadden]

Just installed a P18NPT50 with a SYL-1813-MR gauge.

I have hooked the power up properly to the SYL-1813-MR... ie. it turns on...  

I have connected one red wire to #8, the other red wire to #7 and the white wire to #6.

I set the gauge input type to P100.

When I exit the setup the gauge only shows EEEEE.

What am I missing?

Thanks.

[Kkane]

Your wiring is incorrect.

Please wire white wire to terminal 8. Red wires go to terminal 7 & 6.